|
README FIRST! Command AntiVirus for OS/2
README FIRST!
Command AntiVirus for OS/2
Command Software is proud to introduce Command AntiVirus
Version 4.71.0 with our HoloCheck(tm) scanning technology.
Our HoloCheck scanning technology detects tens of thousands
of viruses and includes improved polymorphic virus detection.
NOTE: After installing Command AntiVirus, we recommend that you
perform a manual scan of your local drives to ensure that
your system is virus-free. This is especially important
if you have not been running anti-virus software prior
to this installation.
For a list of international distributors of Command AntiVirus,
see the DISTRIB.TXT file.
Presently, there is no documentation available for Command AntiVirus
for OS/2. However, you will find that Command AntiVirus for OS/2
contains a graphical interface that is easy to use.
Command AntiVirus for OS/2 provides a 32-bit program and a
command line scanner.
A Release Notes section is provided for each release. It contains
the following topics:
* Special Notes - contains important pre- and post-installation
information that pertains to the release.
* Product Enhancements - contains information about new virus
signatures, scan engine improvements, and new features.
* Fixes - contains updated information on previously reported
problems that have been fixed.
_____________________________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for OS/2 (CSAV) Version 4.71.0
22 July 2002
SPECIAL NOTES
* None for this release.
PRODUCT ENHANCEMENTS
* Scan engine enhancements have been added to this release:
- Improved detection of "intended viruses" and corrupted
virus samples that are frequently found in virus
collections but pose no credible threat. Detection
of these non-working files is enabled by selecting
ALL FILES under PROPERTIES\FILES in the graphical user
interface (GUI). If you are using the command-line
scanner, use the /COLLECT switch.
- Scanning of MIME-encoded files is now supported. BASE64
and QUOTED-PRINTABLE parts will be decoded and then
scanned.
- The scanning speed has been improved
* New virus signatures have been added in this release.
* The following extensions have been added to the default
extensions to be scanned list.
EML - Outlook Express MIME-encoded e-mail messages
WAV - Windows Wave files
* The following switch has been added to the GUIDE.TXT file
and the /HELP list of available switches:
/LOADDEF Load DEF files from a floppy
This switch has been used previously in the creation of the
Rescue Disk Set.
NOTE: As the /LOADDEF switch loads the definition files
into memory, the recovery process increases your
memory requirements.
FIXES
* None for this release.
__________________________________________
RELEASE NOTES
Notes on Command AntiVirus for OS/2 (CSAV) Version 4.62.4
03 October 2001
SPECIAL NOTES
* All viruses previously referred to as W95/x are now
named W32/x. For example, W95/[email protected] is now
called W32/[email protected].
NOTE: x represents a name variable.
PRODUCT ENHANCEMENTS
* Scan engine enhancements have been added to this release.
It is now possible to disinfect some script viruses,
for example, HTML files modified by the Nimda virus.
* New virus signatures have been added in this release.
FIXES
* Particular types of VBS files caused the scan engine to
false positive. The number of false positives has been
decreased in this release.
__________________________________________
PRODUCT SUPPORT
Command Software Systems' technical support includes a variety of
electronic services. You can contact us at:
Command Software Systems, Inc.
1061 E. Indiantown Rd., Suite 500
Jupiter, FL 33477
Voice: 561/575-3200 8:00 a.m. to 8:00 p.m. Eastern Standard Time.
Fax: 561/575-3026
Internet: [email protected]
FTP: ftp.commandsoftware.com
Web: http://www.commandsoftware.com
In Europe contact:
Command Software Systems UK, Ltd.
Ground Floor
Millbank Tower
Millbank
London SW1P 4QP
If dialing from within the UK:
Voice: 020 7 931-9301
Fax: 020 7 931-9302
If dialing from outside the UK:
Voice: +44 20 7 931-9301
Fax: +44 20 7 931-9302
Internet: [email protected]
[email protected]
[email protected]
In Pacific Rim, contact:
Command Software Systems, PTY Pac Rim
Unit 5, 18-20 Floriston Road
Boronia, VIC 3155
Australia
Voice: 1-300-65-0903 or 613-9762-2203
Fax: 1-300-65-0904
Internet: sale[email protected]
Web: http://www.commandcom.com.au
====================================== END ========================================
Home � Purchase Center � Virus Center � Support Center
|
|
|