|
README FIRST! Command Interceptor - MIMEsweeper 3.2x
MAILsweeper(tm) 3.2x
Installing the Command Interceptor(tm)
_____________________________________________________________________________
To enable Command AntiVirus protection, you must install the Command
Interceptor for MIMEsweeper(tm). These instructions can be used to install
it from the downloaded file or from the CD.
NOTE: The CD contains the Command Interceptor Administrator's Guide.
You can also download this guide from our web site at
http://www.commandcom.com/service/tc-manuals.html. The guide
provides installation instructions for installing from the
downloaded file or from the CD for all of the MAILsweeper and
WEBsweeper versions.
The INTRCEPT.PDF file contains the Command Interceptor Administrator's
Guide. This file can be read with the Adobe(r) Acrobat(r) Reader that
is included on the Command AntiVirus CD. For instructions on how to
install Acrobat Reader, see the README.TXT file that is located
in the ADOBE folder on the CD.
Acrobat Reader is not included with the downloadable versions
of Command Interceptor. You can download Acrobat Reader from
Adobe Systems Incorporated through our web site at
http://www.commandcom.com/service/tc-viewutil.html.
PRE-INSTALLATION REQUIREMENTS
Before installing the Command Interceptor for MIMEsweeper, your system must:
- Have MAILsweeper 3.2 installed
- Not have any e-mail anti-virus program installed
NOTE: To remove a previously installed e-mail anti-virus program,
use the Add/Remove Programs feature in the Windows NT(r)
Control Panel.
If your system does not meet the above-mentioned requirements, Command
AntiVirus may not function correctly.
INSTALLING THE COMMAND INTECEPTOR FOR MIMESWEEPER
To install the Command Interceptor for MIMEsweeper, follow these steps:
1. Stop all Services.
2. Make a copy of the VALIDATE.CFG file and save it as a backup file.
This file is located in the CONFIG folder of the MIMEsweeper program folder.
3. Using Notepad, open the VALIDATE.CFG file.
4. Go to the "Validation Configuration Section."
5. Remove from and including [Validation] to and excluding [DetectJava=].
6. Copy and paste in the same place the following:
[Validation]
CSAVDLL=CMDAV
HTML=VALHTML
ValidateAttributes=VALATTR
[CSAVDLL]
PerformIf=ContainerClass==Executable
PerformIf=ContainerClass==Document
PerformIf=ContainerClass==Text
PerformIf=ContainerClass==Binary
0=SUCCESS
1=VIRUSPRESENT
255=SCANFAILED
7. Save and close the file.
8. Click the START button.
9. Click RUN.
10. In the OPEN text box, type regedit
11. Click OK.
12. Click the plus sign (+) to the left of HKEY_LOCAL_MACHINE.
13. Click the plus sign (+) to the left of SOFTWARE.
14. Click the plus sign (+) to the left of Content Technologies.
15. Click the plus sign (+) to the left of MIMEsweeper.
16. Select MIMEsweeper.
17. In an empty space in the right pane, click the right mouse button.
18. Click NEW.
19. Click STRING VALUE.
20. In the text box, type Location
21. Press ENTER.
22. Select Location, and right-click.
23. Click MODIFY.
24. Enter the path of the MIMEsweeper installation folder,
for example, c:\msw\program
25. Click OK. The added line in the registry should read:
Location "c:\\msw\\program"
26. If you are using the electronic version of the Command Interceptor
for MIMEsweeper, extract and copy the CSAV files into the
MIMEsweeper program folder that you specified in Step 24.
If you are using the CD version, copy the Command Interceptor for
MIMEsweeper files from the MSW3.2x\CSAV folder into the
MIMEsweeper program folder that you specified in Step 24.
27. Restart the Server and or Services.
REMOVING COMMAND INTERCEPTOR FOR MIMESWEEPER
To remove Command Interceptor for MIMEsweeper, remove the lines that you added
to the VALIDATION CONFIGURATION SECTION of the VALIDATE.CFG file. For more
information, refer to INSTALLING THE COMMAND INTERCEPTOR FOR MIMESWEEPER.
-----------------------------------------------------------------------------
PRODUCT SUPPORT
Command Software Systems' technical support includes a variety of
electronic services. You can contact us at:
Command Software Systems, Inc.
1061 E. Indiantown Rd., Suite 500
Jupiter, FL 33477
Voice: 561/575-3200 8:00 a.m. to 8:00 p.m. Eastern Standard Time.
Fax: 561/575-3026
Internet: support@commandsoftware.com
FTP: ftp.commandsoftware.com
Web: http://www.commandsoftware.com
In Europe contact:
Command Software Systems UK, Ltd.
Ground Floor
Millbank Tower
Millbank
London SW1P 4QP
If dialing from within the UK:
Voice: 020 7 931-9301
Fax: 020 7 931-9302
If dialing from outside the UK:
Voice: +44 20 7 931-9301
Fax: +44 20 7 931-9302
Internet: command@command.co.uk
helpdesk@command.co.uk
sales@command.co.uk
In Pacific Rim, contact:
Command Software Systems, PTY Pac Rim
Unit 5, 18-20 Floriston Road
Boronia, VIC 3155
Australia
Voice: 1-300-65-0903 or 613-9762-2203
Fax: 1-300-65-0904
Internet: sales@commandcom.com.au
Web: http://www.commandcom.com.au
-- End --
Home · Purchase Center · Virus Center · Support Center
|
|
|