README FIRST!
Command AntiVirus(tm) for Microsoft(r) Exchange
NOTE:  This version is for ONLY Microsoft(r) Exchange 2000.  
       A separate version is available for Microsoft(r) Exchange 
       Version 5.5 with Service Pack 3 or higher, and a separate 
       version is also available for all previous Microsoft 
       Exchange 5x versions.
Please read the Multi-Platform Quick Start Guide. It provides 
installation instructions and an overview of Command AntiVirus for 
all platforms. The Multi-Platform Quick Start Guide is included
on the Command AntiVirus CD, or you can download it from our 
web site at http://www.commandsoftware.com/service/tc-quickst.html.
The MQCKST.PDF file contains the Multi-Platform Quick Start Guide.
This file can be read with the Adobe(r) Acrobat(r) Reader that is
included on the Command AntiVirus CD. For instructions on how to 
install Acrobat Reader, see the README.TXT file that is located 
in the ADOBE folder on the CD.
If you do not have the Command AntiVirus CD, you can download 
Acrobat Reader from Adobe Systems Incorporated through our web 
site at http://www.commandsoftware.com/service/tc-viewutil.html.
A Release Notes section is provided for each release. It contains 
the following topics:
*  Special Notes - contains important pre- and post-installation 
   information that pertains to the release.
*  Product Enhancements - contains information about new virus
   signatures, scan engine improvements, and new features.
*  Fixes - contains updated information on previously reported
   problems that have been fixed.  
===================================================================
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.16
28 February 2003
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   and then restart the server before continuing with this 
   installation. 
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
FIXES
* Some customers reported that on-demands scans are not
  scanning mailboxes and public folders. This has been 
  fixed.
* Some customers reported that they receive a 
  CSAV for Exchange CsConsol.exe - Application Error
  when they browse for a location in the CSAV on-access
  Report dialog box. This has been fixed.
________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.15
13 January 2003
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   and then restart the server before continuing with this 
   installation. 
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
FIXES
* Some customers reported that when Command AntiVirus for
  Microsoft Exchange is installed, they receive a "floating 
  point" run-time error that causes the Microsoft(r) Exchange 
  Information Store service to hang. This has been fixed.
________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.14
19 December 2002
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   before continuing with this installation. 
*  After the installation is complete, you MUST restart the 
   server.
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
FIXES
* Some customers reported that when Command AntiVirus for
  Microsoft Exchange is installed, they receive a "floating 
  point" run-time error that causes the Microsoft(r) Exchange 
  Information Store service to hang. This has been fixed.
________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.12
21 November 2002
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   before continuing with this installation. 
*  After the installation is complete, you MUST restart the 
   server.
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
FIXES
* Some customers reported that when Command AntiVirus for
  Microsoft Exchange is installed, they receive a "floating 
  point" run-time error that causes the Microsoft(r) Exchange 
  Information Store service to hang. This has been fixed.
________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.10
05 September 2002
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   before continuing with this installation. 
*  After the installation is complete, you MUST restart the 
   server.
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
*  The installation is now in a Microsoft Installer (.MSI)
   package format. To start the installation program, you
   MUST run SETUP.EXE. Running the installation program 
   using the MSI causes an error in the installation.
FIXES
* None for this release. 
________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.09
29 July 2002
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   before continuing with this installation. 
*  After the installation is complete, you MUST restart the 
   server.
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
FIXES
*  Some customers reported a problem installing
   Command AntiVirus for Exchange on machines with 
   more than 3 gigabytes of RAM. This has been fixed.
________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.08
29 May 2002
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   before continuing with this installation. 
*  After the installation is complete, you MUST restart the 
   server.
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
FIXES
*  Some customers reported a problem selecting an 
   Administrator mailbox. This has been fixed.
*  Some customers reported a problem selecting more than
   one mailbox. This has been fixed.
________________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.07
23 April 2002
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   before continuing with this installation. 
*  After the installation is complete, you MUST restart the 
   server.
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  Scan engine enhancements have been added to this release:
 -  Detection and deletion of attachments containing W32/[email protected] 
 -  Improved detection of "intended viruses" and corrupted
    virus samples that are frequently found in virus 
    collections but pose no credible threat. 
 -  The scanning speed has been improved 
*  New virus signatures have been added in this release.
*  The following extensions have been added to the default
   extensions. We recommend that you scan ALL files.
   EML  -  Outlook Express MIME-encoded e-mail messages
   WAV  -  Windows Wave files
FIXES
*  None for this release.
__________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.06
5 December 2001
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command 
   AntiVirus for Exchange installed, you MUST first uninstall 
   before continuing with this installation. 
*  After the installation is complete, you MUST restart the 
   server.
*  Proactive scanning and background scanning CANNOT be 
   enabled at the same time.
PRODUCT ENHANCEMENTS
*  New virus signatures have been added in this release.
*  You can now turn on or turn off scanning the body of an
   e-mail message. A SCAN MESSAGE BODY check box has been 
   added to the Task/Properties/Detection dialog box for 
   both the on-access and on-demand scan tasks.
*  You can now turn on or turn off Event Viewer logging for
   the on-access scan task. An EVENT VIEWER LOGGING check box 
   has been added to the on-access Task/Properties/Detection 
   dialog box.
*  A summary notification is now sent to the Administrator  
   for all on-demand scan tasks.
FIXES
*  Some customers reported that a mail alert message is 
   NOT being sent when a virus is found. This has been 
   fixed. A new line character has been added at the end of 
   the mail alert message.
*  Some customers reported that Command AntiVirus for Exchange
   is not auto updating. This has been fixed.
*  Some customers reported that when setting the Administrative
   Mailbox, in some cases, they could not see the Global Address 
   List.
*  Some customers reported that Command AntiVirus for Exchange
   does not recognize users in any Group Object other than a
   Group called USERS. This has been fixed.
__________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.04 
17 October 2001
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  Warning:  If you have a previous version of Command AntiVirus 
   for Exchange installed, you MUST first uninstall before 
   continuing with this installation. 
*  During the installation, the system no longer displays a pop-up 
   informing you that rights are being created for Cyberage. This pop-up
   has been removed. 
*  After the installation is complete, you MUST restart the server.
*  All viruses previously referred to as W95/x are now
   named W32/x. For example, W95/[email protected] is now 
   called W32/[email protected].
   NOTE:  x represents a name variable.
PRODUCT ENHANCEMENTS
*  Scan engine enhancements have been added to this release.
   It is now possible to disinfect some script viruses, 
   for example, HTML files modified by the Nimda virus.   
*  New virus signatures have been added in this release.
FIXES
*  Particular types of VBS files caused the scan engine to
   false positive. The number of false positives has been
   decreased in this release.
*  You can now install Command AntiVirus for Microsoft Exchange 
   on the same computer as CSAV for Windows NT/2000 Server. 
   Previously, doing so caused a conflict between the two scanners.
   This condition resulted in an incorrect warning message that 
   displayed repeatedly and caused slowdowns. This has been fixed.
__________________________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.03 
13 September 2001
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  WARNING:  Command AntiVirus for Microsoft Exchange users
   We do NOT recommend installing Command AntiVirus for Microsoft Exchange 
   on the same computer as CSAV for Windows NT/2000 Server. Doing so causes 
   a conflict between the two scanners that are trying to access the same 
   file. This condition results in an incorrect warning message that will 
   display repeatedly and cause slowdowns.
   This is a temporary condition and will be fixed in a future commercial
   release. Again, the products can coexist on the same network but NOT on
   the same computer.
*  During the installation, the system no longer displays a pop-up 
   informing you that rights are being created for Cyberage. This pop-up
   has been removed. 
*  After the installation is complete, you MUST restart the server.
PRODUCT ENHANCEMENTS
*  Scan engine enhancements have been added to this release, for 
   example, an ELF scanner has been added to cover Unix(r) viruses
   in native Unix file format.  
   The scan engine has also been enhanced to help detect some 
   corrupted (non-working) samples of the Magistr virus.  
*  New virus signatures have been added in this release.
FIXES
*  None for this release.
_____________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.02 
04 September 2001
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  WARNING:  Command AntiVirus for Microsoft Exchange users
   We do NOT recommend installing Command AntiVirus for Microsoft Exchange 
   on the same computer as CSAV for Windows NT/2000 Server. Doing so causes 
   a conflict between the two scanners that are trying to access the same 
   file. This condition results in an incorrect warning message that will 
   display repeatedly and cause slowdowns.
   This is a temporary condition and will be fixed in a future commercial
   release. Again, the products can coexist on the same network but NOT on
   the same computer.
*  During the installation, the system no longer displays a pop-up 
   informing you that rights are being created for Cyberage. This pop-up
   has been removed. 
*  After the installation is complete, you MUST restart the server.
PRODUCT ENHANCEMENTS
*  None for this release.
FIXES
*  None for this release.
_____________________________
RELEASE NOTES
Notes on Command AntiVirus for Exchange (CSAV) Version 3.01 
24 August 2001
SPECIAL NOTES
*  This version is for ONLY Microsoft(r) Exchange 2000.  
   A separate version is available for Microsoft(r) Exchange 
   Version 5.5 with Service Pack 3 or higher. An additional 
   version is available for all previous Microsoft 
   Exchange 5x versions.
*  WARNING:  Command AntiVirus for Microsoft Exchange users
   We do NOT recommend installing Command AntiVirus for Microsoft Exchange 
   on the same computer as CSAV for Windows NT/2000 Server. Doing so causes 
   a conflict between the two scanners that are trying to access the same 
   file. This condition results in an incorrect warning message that will 
   display repeatedly and cause slowdowns.
   This is a temporary condition and will be fixed in a future commercial
   release. Again, the products can coexist on the same network but NOT on
   the same computer.
*  The pre-installation requirements have changed in this version. Before
   installing Command AntiVirus for Exchange, make sure that:
   -  Microsoft Exchange 2000 Server with SP1 or higher is running on 
      your server.
   -  You are logged on as:
      A.  an administrator on the local domain.
      B.  an Exchange Service Account Administrator. This account should be
          the one on which the Exchange services run.
   -  You remove any previous versions of Command AntiVirus for Exchange.
*  During the installation, the system displays a pop-up informing you 
   that rights are being created for Cyberage. These rights need to be 
   created to complete parts of the installation. 
*  After the installation is complete, you MUST restart the server.
*  CSAV for Exchange 2000 contains a virus message notification feature.
   When a virus-infected e-mail attachment is detected through the 
   on-access scan task, by default CSAV sends a mail alert message to the 
   sender, the intended recipients, and the administrator. You can 
   customize the messages that are sent.
PRODUCT ENHANCEMENTS
*  None for this release.
FIXES
*  The memory leak that showed up in the file called INET.INFO.EXE 
   when processing a high volume of mail with infected attachments 
   has been fixed.
===================================================================
PRODUCT SUPPORT
Command Software Systems' technical support includes a variety of 
electronic services. You can contact us at:
Command Software Systems, Inc.
1061 E. Indiantown Rd., Suite 500
Jupiter, FL  33477
   Voice: 561/575-3200 8:00 a.m. to 8:00 p.m. Eastern Standard Time.
     Fax: 561/575-3026
Internet: [email protected]
     FTP: ftp.commandsoftware.com
     Web: http://www.commandsoftware.com
In Europe contact:
Command Software Systems UK, Ltd.
Ground Floor
Millbank Tower
Millbank
London SW1P 4QP
If dialing from within the UK:
   Voice: 020 7 931-9301
     Fax: 020 7 931-9302 
If dialing from outside the UK:
   Voice: +44 20 7 931-9301
     Fax: +44 20 7 931-9302
Internet: [email protected]
          [email protected]
          [email protected] 
In Pacific Rim, contact:
Command Software Systems, PTY Pac Rim
Unit 5, 18-20 Floriston Road
Boronia, VIC 3155
Australia
   Voice: 1-300-65-0903 or 613-9762-2203
     Fax: 1-300-65-0904 
Internet: [email protected]
     Web: http://www.commandcom.com.au
====================================== END ========================================