|
|
||||||||||||||
|
|
README FIRST! TotalCOMMAND
README FIRST! TotalCOMMAND(tm) Command Software is proud to introduce TotalCOMMAND Version 4.0.3. TotalCOMMAND provides network administrators with a fast and efficient method of distributing software patches and updates to all workstations and servers as soon as the patches and/or updates are released by the manufacturer. TotalCOMMAND continually scans your network for patch-related security holes and provides a report of any potential security problems. For installation instructions and an overview of the product, please read the PatchLink(tm) Update Deployment Guide. The guide is included on the Command AntiVirus CD, or you can download it from our web site at http://www.commandsoftware.com/products/totalcommand/download.cfm The PatchLink Update Deployment Guide can be read with the Adobe(r) Acrobat(r) Reader that is included on the Command AntiVirus CD. For instructions on how to install Acrobat Reader, see the README.TXT file that is located in the ADOBE folder on the CD. If you do not have the Command AntiVirus CD, you can download Acrobat Reader from Adobe Systems Incorporated through our web site at http://www.commandsoftware.com/service/tc-viewutil.html A Release Notes section is provided for each release. It contains the following topics: * Special Notes - contains important pre- and post-installation information that pertains to the release. * Product Enhancements - contains information about new virus signatures, scan engine improvements, and new features. * Fixes - contains updated information previously reported problems that have been fixed. ____________________________________________________________ RELEASE NOTES Notes on TotalCOMMAND Version 4.0.3 07 January 2003 SPECIAL NOTES * System Requirements To install and operate TotalCommand, you must: - Have at least a 200MHz Pentium with 256 MB of RAM and 5 GB of available disk space on the installation drive. - Have Microsoft(r) Windows(r) 2000 Server or Advanced Server installed with Service Pack 2 and Microsoft Internet Information Services (IIS) Web Server. Other patches should be applied AFTER installation. NOTE: We highly recommend that you use a dedicated server that has been freshly installed with default options and has no other software applications installed on it. Specifically, you MUST NOT install on a server that has personal firewall products, web server security tools, domain policy restrictions, or any Microsoft SQL Server or Microsoft SQL Desktop Engine (MSDE) installed on it. - Make sure that if you are installing from a Terminal session, the TS user is a member of the local administrator's group. - Have unauthenticated firewall/proxy access to www and storage2.patchlink.com For more information, refer to the PatchLink Update Deployment Guide. PRODUCT ENHANCEMENTS * None for this release. FIXES * None for this release. ************************************************************* PRODUCT SUPPORT Command Software Systems' technical support includes a variety of electronic services. You can contact us at: Command Software Systems, Inc. 1061 E. Indiantown Rd., Suite 500 Jupiter, FL 33477 Voice: 561/575-3200 8:00 am to 8:00 p.m. Eastern Standard Time Fax: 561/575-3026 Internet: [email protected] FTP: ftp.commandsoftware.com Web: http://www.commandsoftware.com In Europe contact: Command Software Systems UK, Ltd. Ground Floor Millbank Tower Millbank London SW1P 4QP If dialing from within the UK: Voice: 020 7 931-9301 Fax: 020 7 931-9302 If dialing from outside the UK: Voice: +44 20 7 931-9301 Fax: +44 20 7 931-9302 Internet: [email protected] [email protected] [email protected] In Pacific Rim, contact: Command Software Systems, PTY Pac Rim Unit 5, 18-20 Floriston Road Boronia, VIC 3155 Australia Voice: 1-300-65-0903 or 613-9762-2203 Fax: 1-300-65-0904 Internet: [email protected] Web: http://www.commandcom.com.au ============================ END ============================
|
|